Tag Archives: zoom

The Big Fix

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/16, ISO 100, 1/250-second

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/16, ISO 100, 1/250-second

I can clearly recall the exact moment when I realized there was a problem with my Nikon 200-500mm, f/5.6E telephoto zoom lens. It was on the afternoon of Wednesday, November 11, 2015. I had the day off from work and was setting up in the backyard to make some test photos demonstrating the effectiveness of the new lens’s vibration reduction (VR) feature. It was the above photo that caught my eye and started me down a challenging, sometimes frustrating road that would take nearly six weeks to complete. I’m some respects, I’m still on that road.

The above image caught my attention because it is so obviously overexposed. It was also totally unexpected. I had been using a hula dancer toy as a photographic subject to test the vibration VR of the 200-500mm lens. Reviewing the rest of the images in the sequence, the image shot at f/5.6 appeared to be properly exposed but the images made at f/8 and higher were overexposed. It also appeared that the degree of overexposure increased in proportion to the increase in f-stop setting used. The above image was made with a setting of f/16 and is about 2 stops overexposed.

In a nutshell, what I had discovered was that my Nikon D610 camera body was not able to control the electromagnetic diaphragm of the 200-500mm lens. The diaphragm determines the aperture of the lens, which controls the amount of light hitting the sensor. Lens aperture (f-stop) along with ISO and shutter speed form what is commonly referred to as the exposure triangle. A compatible trio of settings produces a properly-exposed image. If one of the settings is off, the resulting image will look either over- or underexposed.

That same day, I called Nikon USA’s service and support line and spoke with a call center agent. I described the problem and, ultimately, was advised to send in the lens for evaluation. Just a month earlier in October 2015, I had shipped the lens to Nikon for a firmware upgrade. The shipping and upgrade were covered under warranty for that service center visit. The UPS charge for this shipment would come out of my pocket.

The lens went out via UPS on Wednesday, November 11 and arrived at Nikon’s Los Angeles service center on Friday, November 13. (I chose not to take that as an omen.) The following Monday, November 16, I received an email from Nikon with an estimate for service to the lens. Nikon intended to address the problem with a firmware upgrade, which would be covered under warranty. After reading this, I contacted Nikon via their online service and support site, asking if this was the same firmware upgrade which had already been performed, a month earlier. The email reply to my query read, “Thank you for contacting Nikon. This is covered under warranty and this is the appropriate firmware update. If you have questions or concerns, please call or e-mail us.”

Well, OK then.

The upgrade was done and the lens shipped back at Nikon’s expense, arriving via UPS on November 23. It didn’t take more than a couple of minutes to confirm that the firmware upgrade had done nothing to correct the problem. To more fully document this issue, I made a series of exposures of my favorite test subject to demonstrate the increasing degree of overexposure at larger f-stop settings. Below, are several of the images I uploaded to the Nikon USA service center site for a technician to review.

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 300mm, f/5.6, ISO 100, 1/640-second

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 300mm, f/5.6, ISO 100, 1/640-second

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 300mm, f/8, ISO 100, 1/400-second

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 300mm, f/8, ISO 100, 1/400-second

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 300mm, f/11, ISO 100, 1/200-second

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 300mm, f/11, ISO 100, 1/200-second

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 300mm, f/16, ISO 100, 1/100-second

Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 300mm, f/16, ISO 100, 1/100-second

Tuesday, November 24, I had another phone conversation with a call center agent. I again described the problem and explained that it appeared my Nikon D610 camera was unable to control the lens’s electromagnetic diaphragm. I also shared that I’d made test exposures with four other F-mount lenses: the Nikkor 16-35mm f/4, Tamron 24-70mm f/2.8 VC, Tamron 70-200mm f/2.8 VC and Nikkor 70-300mm f/4.5-5.6. There was no overexposure problem with these lenses and it appeared the problem was isolated just to the 200-500mm f/5.6E lens.

The day before Thanksgiving, November 25, I received an email from a Nikon technician who’d reviewed the above images. In his message, the technician asked that I ship both the D610 camera and the 200-500mm lens for evaluation and possible service. A UPS shipping label was attached. As reluctant as I was to be without my primary camera and the new lens, I wanted to get the problem resolved as quickly as possible. So, I boxed up the D610 and lens, drove to the nearest UPS shipping center and sent my babies off to LA for some TLC.

December was a long month. I had the privilege of serving on a jury for a criminal trial the first week of the month. Several major work projects were due for completion over the next two weeks and I would be traveling with family for the holidays, beginning December 22. Needless to say, I was anxious to have the camera and lens back, both in good working order, in time for the family trip to California. The month was further disrupted when I received news that a close high school friend had passed away. Travel to the Midwest for the funeral took out of town for several days.

I arrived home the afternoon of Sunday, December 20 to find two packages from Nikon sitting on the dining room table. One, was my D610 camera. The other, was my 200-500mm lens. After unpacking my suitcase and getting settled, I fetched a cutting tool from our kitchen utility drawer and opened the packages. A few minutes later, the 200-500 was firmly affixed to the D610 and ready to make images.

To my great relief, the camera and lens made properly-exposed images at a range of apertures. It appeared that Nikon had successfully repaired the problem. What repairs did they make? It’s not entirely clear but, according to the packing slip accompanying the lens, Nikon did the following work:

  • Repaired aperture operation
  • Replaced diaphragm and ring
  • Replaced a lens group
  • Adjusted aperture operation
  • Checked focus and VR operation.
  • Did a general exam and cleaning of the lens

My D610 camera body was also evaluated and found to be in good working order. It was checked and cleaned before return shipment.

Since receiving the repaired lens back from Nikon and during trips to California and New Mexico, I’ve made nearly 3,500 exposures at a range of apertures from f/5.6 to f/16. All appear to be correctly exposed. Below, are a few samples.

White-tailed Kite. Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/8, ISO 500, 1/2000-second

White-tailed Kite. Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/8, ISO 500, 1/2000-second

Alcatraz. Panoramic stitch made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/10, ISO 800, 1/2000-second

Alcatraz. Panoramic stitch made with Nikon D610 and Nikkor 200-500mm f/5.6E at 200mm, f/10, ISO 800, 1/2000-second

Javelina on parade. Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/13, ISO 4500, 1/200-second

Javelina on parade. Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/13, ISO 4500, 1/200-second

Eagles on ice. Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/16, ISO 640, 1/250-second

Eagles on ice. Photo made with Nikon D610 and Nikkor 200-500mm f/5.6E at 500mm, f/16, ISO 640, 1/250-second

I am, of course, thrilled to have my lens back in good working order. Though some additional time is needed before I’ll have full confidence that the repair to the lens completely resolves the diaphragm-control problem, I have been extremely satisfied with the lens’s performance over the last several weeks. I also understand that equipment sometimes fails. That’s what warranties are for. I don’t fault Nikon for the mechanical failure to their product and am genuinely grateful that they addressed the problem in a forthright and timely manner.

I would like to take this opportunity to share some advice I’ve offered Nikon through email communication. In a nutshell, I’ve recommended Nikon update their service and support system to provide…

  • customers email updates about the status of their repair and estimated time of completion.
  • customers access to a Nikon technician who can explain in plain language the problem being addressed.
  • call center staff access to a customer database with detailed information about past and ongoing product service and repairs.

While I am satisfied with the outcome of this service and repair experience, there were times during those six weeks when the lack of information and the inability to communicate with a technically-proficient Nikon employee added to my level of frustration. The experience could have been made less stressful if I’d been provided regular updates on the status of my repair, had the opportunity to communicate by phone or instant messaging with a technician about the symptoms I was experiencing, and if I had not needed to explain the problem to four different call center staff members, none of whom appeared to have access to a detailed history of this particular repair.

I love using and doing photography with Nikon products and welcome the opportunity to remain a Nikon customer for many years to come. That said, their customer support could use some work. Whether you’re a Nikon employee, a fellow photographer or a friend, please take this blog entry in the spirit in which it is offered: an objective recounting of a recent customer service experience and an effort to provide constructive feedback to a company whose products I truly enjoy using.

Well, I’ve been rambling on about this far too long. It’s time for me to get out and shoot!

January 2016 | Bill Ferris

Autofocus Fine Tune

Autofocus Fine Tune test shot for Tamron 70-200mm f/2.8 Di VC USD lens at 200mm, f/2.8, ISO 100, 1/200-second with flash and Nikon D610 AF Fine Tune set to OFF (Bill Ferris)

Autofocus fine-tune test shot for Tamron 70-200mm f/2.8 Di VC USD lens at 200mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune is turned off. (Bill Ferris)

Choosing the right autofocus (AF) mode can be a real challenge. You could leave the driving to the camera and go with Auto-servo AF (AF-A) mode. If you go that route, don’t expect that dumb box of a camera to make the right choices. It will make choices but they’ll probably not be the same choices you would make.

Being the risk-taker that you are, I’m sure you spend most of your time shooting in either Single-servo (AF-S) or Continuous-servo (AF-C) mode. These allow you greater control and, when good choices are made, a higher success rate making keeper images. Among those choices, is deciding which one or more AF points to use. Do you use one, nine, twenty-one or all the AF points on your camera’s sensor? If just one, do you go with the center point or an outer point? If you choose a group of points, which group? Do you allow the camera to have a say in which AF points are used? So many choices.

Let’s assume you’ve chosen an AF mode, and selected the number and location of the AF points that will be used. The next challenge is to successfully place at least one AF point over your subject and acquire focus. When it all comes together, it’s a beautiful moment. The shutter clicks open and the image swiftly, silently, gets encoded as a collection of 1’s and 0’s on an SD card.

Later, when you look at the photograph in Lightroom and realize it’s still not in focus, that moment of joy becomes frustration. What happened? Why is the eye just ever so slightly soft?

Of all the factors than have the potential to cause an out-of-focus image, arguably the most pernicious is a camera/lens combo that is ever so slightly miscalibrated. Despite your mastery of the camera’s AF system, your successful effort to track the subject and the presence of mind to make an exposure at the decisive moment, that slight miscalibration wreaks havoc. Focus is not set on the eye beneath the AF point. Instead, focus is slightly in front of or just behind the eye. The result is an out of focus image that ends up being deleted rather than marked as a keeper.

Autofocus fine-tune is a tool offered by many professional and high end consumer cameras. It allows you to adjust where focus is set to compensate for a miscalibrated lens. How does it work?

In the above images, the blue shaded portion of the semitransparent square overlay represents an out-of-focus area of the black and white image. The portion of the black and white photo visible within the blue shaded overlay represents the area of the face falling within the focus plane and appearing to be be in focus in the image. TOP: This illustrates a properly focused image. The eyes, brow and mouth fall within the focus plane and appear in-focus. MIDDLE: This represents a back-focused image. The ears an temples are within the focus plane and appear sharp. However, the eyes are above the focus plane and look soft. BOTTOM: This represents a front-focused image. The tip of the nose and chin fall within the focus plane and appear sharp. However, the eyes are behind the focus plane and look soft.

In the above images, the blue shaded portion of the semitransparent square overlay represents an out-of-focus area of the black and white image. The portion of the black and white photo visible within the blue shaded overlay represents the area of the face falling within the focus plane and appearing properly in-focus.
TOP: This illustrates a properly focused image. The eyes, brow and mouth fall within the focus plane and appear in-focus.
MIDDLE: This represents a back-focused image. The ears and temples are within the focus plane and appear sharp. However, the eyes are above the focus plane and look soft.
BOTTOM: This represents a front-focused image. The tip of the nose and chin fall within the focus plane and appear sharp. However, the eyes are behind the focus plane and look soft.

In the above illustration, the focus plane of the camera is represented by the semitransparent, blue square overlay. While all photographs have at least a minimal depth of field, for simplicity, I’m illustrating the focus plane as a two-dimensional, flat zone. With large aperture, small focal ratio lenses being popular for portraiture, the shallow depths of field produced by such lenses leave little margin for error when it comes to achieving accurate focus. If focus is not set on the eye or within a few millimeters of the eye, the resulting image will look “soft” and out-of-focus. There will be portions of the subject’s face that look sharp and in-focus, but if the eyes look soft, the overall impression will be that the photo is soft.

A miscalibrated camera/lens combo may give every indication of making a properly focused exposure. However, despite the fact that the focus point may be directly over the subject’s eye, the camera will set focus slightly in front of or behind the eye. If you are shooting with a fast f-stop, that slight miscalibration can result in unacceptably soft images. Autofocus fine-tune allows you to compensate for this problem.

In the Nikon D610 menu system, AF Fine Tune is found in the Setup Menu. (Bill Ferris)

In the Nikon D610 menu system, AF fine-tune is found in the Setup Menu. (Bill Ferris)

Entering the AF fine-tune menu, the first option is where you select, ON or OFF, for this control. The second setting is the Saved Value for the lens. (Bill Ferris)

Entering the AF fine-tune menu, the first setting allows you to select, ON or OFF. The second setting is the Saved Value for the lens. (Bill Ferris)

Entering the Saved Value setting, select a positive or negative number from +20 to -20. Positive numbers move the focus point farther from the focus plane to compensate for front-focused images. A negative setting moves the focus point closer to the camera focus plane to compensate for back-focused images. (Bill Ferris)

Entering the Saved Value setting, select a positive or negative number from +20 to -20. Positive numbers move the focus point away from the camera to compensate for front-focused images. A negative setting moves the focus point toward the camera to compensate for back-focused images. (Bill Ferris)

Nikon cameras recognize Nikkor lenses and many third party lenses, and are able store AF fine-tune settings for up to 12 different lenses. (Bill Ferris)

Nikon cameras recognize Nikkor lenses and many third party lenses, and are able store AF fine-tune settings for up to 12 different lenses. (Bill Ferris)

The above series of images illustrate how to use AF fine-tune to add an adjustment to compensate for a lens that consistently front-focuses or back-focuses when used with a specific camera body. AF fine-tune settings are not transferable. A setting on one camera may not be needed on a different but same model body. The setting is unique to that specific camera/lens combination.

Also, Nikon bodies do not allow you to define multiple settings for the same lens. For example, when working with a zoom lens, you are limited to one setting for that lens. If AF fine-tune is engaged, the adjustment will be applied regardless of the focal length used. I recommend you test a zoom lens at the focal length at which it will most likely be used.

The below series of images illustrate my approach to testing a lens to determine if an AF fine-tune adjustment is needed. Right click the below images to open a full-size JPEG in a new window.

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at OFF. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune turned off. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at +2. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at +2. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at +4. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at +4. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at +6. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at +6. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at +8. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at +8. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at +10. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at +10. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at -2. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at -2. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at -4. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at -4. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at -6. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at -6. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at -8. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at -8. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF Fine Tune at -10. (Bill Ferris)

Photo made with Nikon D610 and Tamron 24-70mm f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 100, 1/200-second with flash. AF fine-tune at -10. (Bill Ferris)

The above series of images is a real world test under real world conditions. When shooting portraiture with the D610 and Tamron 24-70 f/2.8 Di VC USD, I typically shoot wide open with a mix of ambient light and flash at 1/200-second. If you’re going to test a lens to determine an appropriate AF fine-tune setting, test the lens under the same conditions in which it will most likely be used.

AF fine-tune is turned off for the first image in the series. The next ten images were taken with AF fine-tune turned on. A +2 adjustment is applied in the second image. Images three through six have adjustments of +4, +6, +8 and +10 applied, respectively. A -2 adjustment has been applied to image seven in the series. The next four images have adjustments of -4, -6, -8 and -10 applied, respectively. At each setting, I took five handheld exposures with vibration compensation (VC) engaged. The above series includes the second exposure in each five-exposure set.

Reviewing the exposures at 1:1 in Lightroom, all five exposures with AF fine-tune turned off were acceptably sharp at the focus point. Two of the five in that set were a bit shallow in focus, displaying minimal in-focus depth of field in front of the focus point. The set which most consistently produced sharp images with good depth of field both in front of and behind the focus point is the set with an adjustment of -6 applied.

Now, it gets complicated. Normally, I would choose the -6 setting for the Tamron 24-70mm f/2.8 VC and leave it at that. However, I also have a Tamron 70-200mm f/2.8 Di VC USD lens but the Nikon firmware does not distinguish between it and the 24-70mm f/2.8 VC. If I leave AF fine-tune turned on with a -6 setting for the 24-70mm f/2.8, the same adjustment will be applied when the 70-200mm f/2.8 is mounted on the D610. So, I’ve also tested the Tamron 70-200mm, using the same approach as with the shorter zoom.

The results of the testing with the Tamron 70-200mm f/2.8 VC were fairly straightforward. The best set of images was taken with AF fine-tune turned off. The set taken with an AF fine-tune adjustment of -6 were among the worst of the lot.

After testing both lenses, I’ve decided to store a -6 adjustment for the Tamron lenses but to leave AF fine-tune turned off. Both lenses make sharp, usable images without an AF fine-tune adjustment. If I remember to activate AF fine-tune when the 24-70 VC is mounted, so much the better.

Now, it’s time to get out and shoot.

Bill Ferris | November 2015

Nikon 200-500mm f/5.6E – Short Term Review

The Nikon AF-S 200-500mm f/5.6E ED VR Zoom Lens

The Nikon AF-S 200-500mm f/5.6E ED VR Zoom Lens (Bill Ferris)

In August 2015, Nikon announced three new lenses that would soon be available to the photographic community. Introduced that summer day were the AF-S 24-70mm f/2.8E ED VR, the AF-S 24mm f/1.8G ED and the AF-S 200-500mm f/5.6E ED VR.

The featured player of this trio was the eagerly anticipated refresh of Nikon’s well-regarded AF-S 24-70mm f/2.8G ED zoom lens. The 24-70 f/2.8G is a popular wide angle zoom among both professional and enthusiast photographers. It is considered by many wedding and portrait photographers to be among the Holy Trinity of fast Nikon zooms, including the 14-24mm f/2.8G ED and the 70-200mm f/2.8G ED VR II. The new lens, the AF-S 24-70mm f/2.8E ED VR features Nikon’s electronic aperture mechanism and also adds vibration reduction (VR) technology to the venerable optic.

The biggest surprise of the day – in more ways than one – was Nikon’s introduction of the AF-S 200-500mm f/5.6E ED VR telephoto zoom lens. What made this lens so surprising were its focal length range and price. Nikon and Canon are known around the world as the leading manufacturers of telephoto lenses for professionals and serious amateurs. From the 200mm f2 to the 800mm f/5.6, Nikon’s line of fast long focal length primes are coveted by sports, wildlife and action photographers. Two professional grade zooms, the AF-S 80-400mm f/4.5-5.6G ED VR and AF-S 200-400mm f/4G ED VR II, bring zoom flexibility to the system.

These are professional quality lenses and priced, accordingly. With a manufacturer’s suggested retail price of about $2,700 US, the 80-400mm f/4.5-5.6G is the least expensive of the bunch. The fast primes are priced at from $6,000 to $17,900 US. The 200-400mm f/4G weighs in at a hefty $7,000 US.

By contrast, the new 200-500mm f/5.6E is priced to be accessible to the consumer: just under $1,400 US. The zoom range and constant aperture suggest this lens was designed and released to compete directly with consumer-priced zooms manufactured by Tamron and Sigma. Tamron introduced the 150-600mm f/5-6.3 Di VC USD in November 2013. Priced at about $1,100 US, the Tamron 150-600 brought quality long telephoto zoom performance squarely within reach of the enthusiast photographer. While sports shooters balked at the relatively slow aperture range, wildlife photographers lined up to add this new lens to their arsenals.

Less than a year later in September 2014, Sigma entered the fray introducing two 150-600mm f/5-6.3 telephoto zooms. They were labeled “Contemporary” and “Sports.” The 150-600mm f/5-6.3 DG OS HSM Contemporary was introduced at about $1,100 US and had the Tamron zoom squarely in its sites. Though the highest priced of the trio at about $2,000 US, the Sigma 150-600 f/5-6.3 DG OS HSM Sports is still well under the entry level fee for a high end Nikon or Canon zoom.

I spent the better part of a year contemplating whether or not I should add one of these three lenses to my collection. My growing interest in sports and wildlife photography had created a need for more reach in my lens collection. The Tamron and Sigma zooms certainly addressed that interest. However, their relatively slow focal ratios introduced just enough hesitation that I never pulled the trigger to place an order. Then, Nikon’s August 2015 announcement happened.

Within 48-hours, I had done something that was a first for me: pre-ordered a lens. I’ve never been much of a first adopter of tech. Rather than live on the bleeding edge of consumer technologies, I generally prefer to stand back, observe and wait for good deals to emerge on established quality kit. The Nikon AF-S 200-500mm f/5.6E ED VR, however, is a different story.

The Nikon 200-500mm f/5.6E, Tamron 150-600 f/5-6.3 Di VC USD, Sigma 150-600 f/5-6.3 DG OS HSM Contemporary and Sports lenses are shown above in their comparative sizes.

The Nikon 200-500mm f/5.6E, Tamron 150-600 f/5-6.3 Di VC USD, Sigma 150-600 f/5-6.3 DG OS HSM Contemporary and Sports lenses are shown above in their comparative sizes.

I have to be honest, the Nikon name immediately intrigued me. I’m a Nikon shooter, having owned five Nikon camera bodies and numerous lenses over the last 25 years. When I placed the pre-order, I did so trusting that Nikon would deliver a quality product. Time will tell if that is the case.

Setting aside brand loyalty, there were several performance specifications that also caught my attention. The first and most immediate was the 200mm to 500mm focal length zoom range. At the short end this lens picks up where the excellent Tamron 70-200mm f/2.8 Di VC USD leaves off. At the long end of 500mm, the lens offers more than enough reach for quality sports photography and also for wildlife. The constant f/5.6 aperture through the full zoom range makes this lens a half-stop faster than the Tamron and Sigma zooms. It may not seem like much but that difference in light-gathering means my Nikon D610 camera should be able to use all 39 autofocus points at any focal length. At f/6.3, the D610 starts dropping the outermost AF points.

Another intriguing feature was the latest generation VR technology packaged with this lens. Nikon describes the 200-500 f/5.6E as being capable of delivering up to 4.5 stops of vibration reduction. The general rule of photography has, for generations, been that a photographer using good handholding technique should get sharp results using a shutter speed of 1/focal length. In the case of a 500mm lens, a 1/500-second exposure should not require VR. (This is not to say that VR would not aid a handheld exposure at that speed, merely that good handholding technique with a 500mm at 1/500-second should produce a sharp image.) A 4.5 stop improvement with VR translates to a minimum exposure time of between 1/20- and 1/30-second. That’s amazing!

An MTF chart showing the theoretical performance of the Nikon AF-S 200-500mm f/5.6E at 200mm f/5.6. (courtesy Nikon Corporation)

A Modulation Transfer Function (MTF) chart showing the theoretical performance of the Nikon AF-S 200-500mm f/5.6E at 200mm f/5.6. The industry standard practice is that MTF charts display computer-modeled performance characteristics based on lens design. (courtesy Nikon Corporation)

An MTF chart showing the theoretical performance of the Nikon AF-S 200-500mm f/5.6E at 500mm f/5.6. (courtesy Nikon Corporation)

A MTF chart showing the theoretical performance of the Nikon AF-S 200-500mm f/5.6E at 500mm f/5.6. (courtesy Nikon Corporation)

The above MTF (Modulation Transfer Function) charts illustrate the theoretical performance of the Nikon AF-S 200-500mm f/5.6E ED VR zoom lens. The top chart illustrates theoretical performance of the lens at 200mm f/5.6 while the bottom chart shows theoretical performance at 500mm f/5.6. Interpretations of MTF charts are always at least somewhat subjective. That said, I believe a reasonably objective translation would be as follows:

The red lines illustrate contrast performance while the blue lines illustrate resolution performance. The vertical scale measures performance in both areas with better performance being higher on the scale. The horizontal scale measures distance from the center of the lens. At 200mm f/5.6, the lens should deliver excellent contrast (0.9 or higher) across the entire angle of view. Resolution should also be excellent from the center to roughly two-thirds the distance to the edge of the angle of view. Very good resolution performance can be expected across much of the rest of the angle of view with good performance at the very edge. At 500mm, f/5.6, the lens continues to deliver excellent contrast performance across the full angle of view. The slight separation of the sagittal (solid) and meridional (dashed) lines suggests a subtle though largely imperceptible loss of contrast. Resolution performance continues to be excellent at 500mm, f/5.6 across half the angle of view and remains very good to the edge of the field. The separation of sagittal and meridional lines suggests a possible though subtle astigmatism. This lens should control for chromatic aberration, quite well.

The excellent theoretical performance of the lens was the deal-maker for me, giving real confidence in the decision to pre-order. Then, the waiting began.

The Nikon AF-S 200-500mm f/5.6E ED VR zoom lens fully extened to 500mm with the lens hood attached.

The Nikon AF-S 200-500mm f/5.6E ED VR zoom lens fully extended to 500mm with the lens hood attached. (Bill Ferris)

On the evening of September 23, UPS delivered my copy of the Nikon AF-S 200-500mm f/5.6E ED VR zoom lens. It was too late on that day to do much more than record an unboxing video for my YouTube channel and take a few photos of the new lens. A month has now passed during which time I have made a bit more than 2,600 exposures with the 200-500. What follows, is a Short Term Review based on the first month’s use. This isn’t a final review and, despite having formed some strong initial impressions, will not include any final conclusions. This review will include my initial observations about the performance of the lens and my own development as a photographer working at super telephoto ranges.

I’ll begin with the vital statistics:

  • Length at 200mm (no lens hood; no lens caps): 10 1/2″
  • Length at 200 mm (w/ lens hood): 14″
  • Length at 500mm (no lens hood; no lens caps: 13 1/2″
  • Length at 500mm (w/ lens hood): 17″
  • Diameter (front of lens): 4″
  • Circumference (front of lens): 13″
  • Diameter (front of lens with lens hood): 5 1/8″
  • Circumference (front of lens hood): 16 1/2″
  • Weight (w/ lens hood, lens caps, tripod collar): 5 lbs. 6.5 oz (86.5 oz.)
  • Weight (w/ lens hood, tripod collar): 5 lbs. 5.0 oz. (85.0 oz)
  • Weight (w/ tripod collar): 5 lbs. 1 oz. (81.0 oz)
  • Weight (w/ tripod collar and Oben mounting plate): 5 lbs. 2.5 oz (82.5 oz)
  • Weight of Lens only (no tripod collar, no lens hood, no lens caps): 4 lbs. 10.0 oz. (74.0 oz.)
  • Weight of tripod collar: 7.0 oz.
  • Lens Hood dimensions: 3 3/4″ length x 5 1/8″ diameter
  • Weight of lens hood: 4.0 oz.
Controls on the side of hte Nikon 200-500mm f/5.6E. (Bill Ferris)

Controls on the side of the Nikon 200-500mm f/5.6E. (Bill Ferris)

The left side of the lens is where you will find the various controls:

  • M/A – M: Autofocus switch. In M/A, lens autofocuses with instantaneous manual focus override as an available option. In M, the lens manually focuses, only.
  • FULL / ∞ to 6m: When focusing on subjects nearer than 6 meters (20 feet) distant, set to FULL. When focusing on subjects at greater than 6 meters distance, set to ∞ to 6m.
  • VR On / VR Off: Vibration Reduction (VR) On/Off switch. VR should not be turned on until camera body is on. VR should be turned off before camera body is turned off.
  • NORMAL / SPORT: With VR on, you may choose either NORMAL or SPORT mode. In SPORTS mode, Nikon VR recognizes a panning motion and compensates for camera shake while preserving intended motion blue due to panning.
  • Lock 200: This switch locks the lens at a 200mm focal length during transportation and storage. With the lock disengaged, the lens may be zoomed to any point in the focal length range.
This photo shows the Nikon F-mount flange on the 200-500 f/5.6E lens. Notice the rubber gasket which provides a seal between the lens and camera body for protection from weather and the elements. The lens also features a rubberized ring at the front of the lens, also for weather sealing. (Bill Ferris)

This photo shows the Nikon F-mount flange on the 200-500 f/5.6E lens. Notice the rubber gasket which provides a seal between the lens and camera body for protection from weather and the elements. (Bill Ferris)

The rubberized seal around the front of the Nikon 200-500mm f/5.6E ED VR provides both protection for the front lens element and a measure of weather sealing from the elements. (Bill Ferris)

The rubberized seal around the front of the Nikon 200-500mm f/5.6E ED VR provides both protection for the front lens element and a measure of weather sealing from the elements. (Bill Ferris)

After shooting with this lens for a bit longer than one month, I would describe the construction and controls as of good to very good quality. The collapsed lens feels hefty and solid in the hands. There is plenty of plastic in the external shell but the lens does not feel, cheap. There are no odd internal sounds when shaking the lens, and not clicking or grinding sounds when rotating either zoom or focus. The tripod collar is sturdy with the mounting foot serving perfectly as a handle when carrying just the lens.

The zoom ring, located near the end of the lens, is rubberized and has smooth motion with just the right degree of tension. I would describe the sound made by the rotating zoom ring as smooth zippy. The throw (angle of rotation through the complete zoom range) is fairly long at approximately 155 degrees and this makes it difficult to quickly zoom from one end of the range to the opposite. The focus ring, located near the back of the lens just in front of the control cluster has a hard plastic feel and loose rotation action. It makes a whispery sound when rotated and has a throw of about 190 degrees. I typically shoot with the lens focus control set to M/A (Auto with instantaneous manual override) and have not had any instances where I unintentionally brushed against or rotated the focus ring to lose focus.

The lens hood and soft case that ship with the Nikon 200-500mm f/5.6E are cheap, low quality items. The lens hood is functional, at best, while the soft case is of marginal value unless repurposed to something other than its intended task. (Bill Ferris)

The lens hood and soft case that ship with the Nikon 200-500mm f/5.6E are cheap, low quality items. The lens hood is functional, at best, while the soft case is of marginal value unless repurposed to something other than its intended use. (Bill Ferris)

The 200-500mm f/5.6E ships with a lens hood and soft case. These are, quite frankly, fairly cheap low quality items. The lens hood locks in place with a quarter turn. It is not a firm, confident lock. Rather, the hood issues a soft click when locked in position and can be easily rotated to unlock. There have been a couple of occasions when I’ve inadvertently bumped the lens hood enough to either rotate it or flex it just enough to loosen the connection. The soft case is just that. The only padding is a thin sheet at the bottom of the case.

Just a couple of weeks after the lens started shipping, Nikon Europe announced a firmware upgrade to address and correct a bug in the lens’ autofocus performance. In summary, when simultaneously engaging autofocus while zooming, autofocus will occasionally shift to manual mode. Autofocus can be restored by releasing the shutter, AF-ON or AE-L/AF-L button and then re-engaging so, this is not a catastrophic issue. I would describe it as an annoyance. In online discussion forums, some photographers have questioned the value of the firmware upgrade saying they never simultaneously zoom while engaging autofocus.

Others, myself among them, say the technique is one they employ on a more or less regular basis. When photographing sports or wildlife, I will often adjust zoom and focus, simultaneously, in order to maintain both good composition and focus while tracking a fast-moving subject. Rather than wait for Nikon to send me a personalized invitation, I visited the Nikon USA website and found their statement about the firmware upgrade. Nikon treats this, not as a service under warranty issue, but rather as an optional upgrade which is available to their US customers. Nikon paid for expedited 2nd day shipping to and from their Los Angeles facility. The lens was in their possession for two business days and Nikon kept me informed via email of the status of the work being done.

UPS delivered the upgraded lens on October 15. The following morning, I tested the autofocus performance by using back button focus to keep AF engaged while simultaneously panning and zooming between two trees in my backyard. Autofocus continued to work while I panned and zoomed from one tree to another more distant tree, repeating this motion twenty times.

The autofocus bug continues a trend for Nikon of shipping new products with performance issues. It is a problem that dates back at least to 2012, including the D800/D800E camera bodies (2012-left side autofocus), D600 body (2012- dust and oil on sensor), D750 body (2014-dark banding when shooting backlit subjects), D810 body (2014-bright spots in image during long exposures), 24-70mm f/2.8E ED VR zoom lens (2015-shipping date delayed) and now the 200-500mm f/5.6E. It is an annoying and disturbing development for a company that used to be known for producing and delivering high quality products. Nikon has now developed a reputation of poor quality control during product development and of using early adopting customers as beta testers. If there is a silver lining in this, it is that Nikon has been more proactive and acknowledging and responding to problems with new products over the last year or so.

With the tripod collar locking mechanism loosened, rotate the collar until the indicator with the carrot is aligned with both the F-mount indicator dot and the collar alignment indicator on the lens. In this orientation, the collar should slide easily off the back of the lens. (Bill Ferris)

With the tripod collar locking mechanism loosened, rotate the collar until the indicator with the carrot is aligned with both the F-mount indicator dot and the collar alignment indicator on the lens. In this orientation, the collar should slide easily off the back of the lens. (Bill Ferris)

If you are unfamiliar with Nikon tripod collars, figuring out how to remove the collar from the tripod can be a bit confusing. The collar is not hinged and does not open fully for removal. Rather, when the locking mechanism is loosened, the collar open just enough to slide over the back of the lens. However, the collar features an interior channel which slides over four locking screws on the lens. To align the locking screws with openings in the collar channel, rotate the loosened collar until the indicator with the carrot is aligned both with the F-mount indicator dot and with the collar alignment indicator on the camera. With the collar rotated as shown in the above photo, it should slide easily off the back of the lens.

Well, now that the housekeeping is taken care of, let’s focus on the central question: is the AF-S 200-500mm f/5.6E ED VR lens a quality optic? Does it, for want of a better metaphor, punch above its weight class to deliver performance exceeding what one typically gets when shooting with a sub-$1,500 telephoto zoom? Let’s look at some sample photos. Full-sized JPEG’s of the below images are available for viewing by right-clicking on the image.

A coot shakes off pond water at Raymond County Park in Kachina Village, Arizona. This photo was taken with the Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 1400, 1/100-second. It has been cropped and processed in Adobe Lightroom to taste. (Bill Ferris)

A coot shakes off pond water at Raymond County Park in Kachina Village, Arizona. This photo was taken with the Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 1400, 1/100-second. It has been cropped and processed in Adobe Lightroom to taste. (Bill Ferris)

A Eurasian Eagle Owl stands stoically on its perch during a raptors show at Flagstaff Arboretum. This photo was taken with the Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 4000, 1/500-second. It has been processed to taste in Adobe Lightroom. (Bill Ferris)

A Eurasian Eagle Owl stands stoically on its perch during a raptors show at Flagstaff Arboretum. This photo was taken with the Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 4000, 1/500-second. It has been processed to taste in Adobe Lightroom. (Bill Ferris)

A waning gibbous Moon hangs silently over Flagstaff on a mid-autumn night. This photo was taken with the Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 400, 1/1250-second. It has been cropped processed to taste in Adobe Lightroom. (Bill Ferris)

A waning gibbous Moon hangs silently over Flagstaff on a mid-autumn night. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 400, 1/1250-second. It has been cropped processed to taste in Adobe Lightroom. (Bill Ferris)

A Weber State running back sprints to the right during a game against Northern Arizona in the J. L. Walkup Skydome. This photo was taken with the Nikon D610 and 200-500mm f/5.6E at 400mm, f/5.6, ISO 6400, 1/200-second. It has been cropped processed to taste in Adobe Lightroom. (Bill Ferris)

A Weber State running back sprints to the right during a game against Northern Arizona in the J. L. Walkup Skydome. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 400mm, f/5.6, ISO 6400, 1/200-second. It has been cropped processed to taste in Adobe Lightroom. (Bill Ferris)

A dark-eyed junco sits perched on a tree branch in Raymond County Park in Kachina Village, Arziona. This photo was taken with the Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 2800, 1/1000-second. It has been cropped processed to taste in Adobe Lightroom. (Bill Ferris)

A dark-eyed junco sits perched on a tree branch in Raymond County Park in Kachina Village, Arziona. This photo was taken with the Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 2800, 1/1000-second. It has been cropped processed to taste in Adobe Lightroom. (Bill Ferris)

A monarch butterfly rests momentarily atop a New Mexico thistle flower at Logan's Crossing near Flagstaff, Arizona. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 400, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

A monarch butterfly rests momentarily atop a New Mexico thistle flower at Logan’s Crossing near Flagstaff, Arizona. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 400, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

Cheerleaders celebrate a Northern Arizona touchdown during a college football game at the J. L. Walkup Skydome in Flagstaff, Arizona. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 8063, 1/500-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

Cheerleaders celebrate a Northern Arizona touchdown during a college football game at the J. L. Walkup Skydome in Flagstaff, Arizona. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 8063, 1/500-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

American Coots casually scan for snacks in a Kachina Village pond. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 3600, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

American Coots casually scan for snacks in a Kachina Village pond. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 3600, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

Weber State quarterback, Jadrian Clark, stretches toward the goal line late in the 3rd quarter of a game against Northern Arizona in the J. L. Walkup Skydome. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 480mm, f/6.3, ISO 8063, 1/500-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

Weber State quarterback, Jadrian Clark, stretches toward the goal line late in the 3rd quarter of a game against Northern Arizona in the J. L. Walkup Skydome. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 480mm, f/6.3, ISO 8063, 1/500-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

A third quarter Moon as seen on an October night in northern Arizona. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 900, 1/800-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

A third quarter Moon as seen on an October night in northern Arizona. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 900, 1/800-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

A dark-eyed junco in Raymond County Park in Kachina Village, Arizona. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 3600, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

A dark-eyed junco in Raymond County Park in Kachina Village, Arizona. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 3600, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

An Abert squirrel gnoshes on pine nuts in a northern Arizona Ponderosa pine tree. This photo was made with a Nikon D610 and 200-500mm f/5.6 at 480mm, f/5.6, ISO 1400, 1/125-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

An Abert squirrel gnoshes on pine nuts in a northern Arizona Ponderosa pine tree. This photo was made with a Nikon D610 and 200-500mm f/5.6 at 480mm, f/5.6, ISO 1400, 1/125-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

A peregrine falcon sits calmly on the arm of a volunteer during a raptor show at the Arboretum at Flagstaff. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 3200, 1/500-second. It has been processed to taste in Adobe Lightroom. (Bill Ferris)

A peregrine falcon sits calmly on the arm of a volunteer during a raptor show at the Arboretum at Flagstaff. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 3200, 1/500-second. It has been processed to taste in Adobe Lightroom. (Bill Ferris)

A Eurasian Eagle Owl watches visitors from its perch during a raptors show at the Arboretum at Flagstaff. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 2800, 1/500-second. It has been processed to taste in Adobe Lightroom. (Bill Ferris)

A Eurasian Eagle Owl watches visitors from its perch during a raptors show at the Arboretum at Flagstaff. This photo was taken with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 2800, 1/500-second. It has been processed to taste in Adobe Lightroom. (Bill Ferris)

After my first month shooting with the AF-S 200-500mm f/5.6E ED VR telephoto zoom, I find the lens to be very sharp, delivering crisp detailed images of nature and wildlife.  If you open the above image of the Eurasian eagle owl (the last in the sequence) in a new tab and zoom in, you’ll see my silhouetted form clearly defined in the owl’s pupil. You’ll see similar results in the full-size JPEG images of the peregrine falcon and in the first photograph of the Eurasian eagle owl.

The detail in the lunar photos is very sharp. At 500mm, the lens easily resolves craters of approximately 10 kilometers diameter and partially resolves 1 kilometer wide craters on the Moon’s surface. Details such as bright ejecta rays and dark maria are also easily discerned. Chromatic aberration along the lunar limb is negligible and quite easily eliminated with the click of a button in Lightroom.

Check out the detail in the Abert’s squirrel photo. I shot this from a forest path with the squirrel about 30 feet up in a tree. Focus is on the squirrel’s hind leg but, at f/5.6, there is enough depth of field that the eye is acceptably sharp. The best detail in this image is in that hind leg, in the toes, claws and padding on the bottom of the foot. And check out the small bit of green – a freshly sprouted branch – on the bark below the squirrel’s bushy tail.

The photos of the dark-eyed junco show good focus on the eye, fine detail in the feathers and a very pleasing creamy bokeh. This lens handles background blur in a wonderful manner. The bokeh is smooth and soft, and more than adequate to create the desired separation between the subject and background. The junco photos were made from a distance of about 50 feet. The photos of the American coots were made at various distances, ranging from about 20 feet to a greatest distance of nearly 80 feet. The eyes and water droplets are crisp and well-defined. The feathers show good detail and texture. When you consider this high level of performance is made available in a lens priced thousands less than the Nikon telephotos that most closely compete with it in terms of sharpness, contrast and general image quality, the 200-500mm f/5.6E is truly an astounding value.

If you can’t make outstanding images with this lens, it’s not the lens’ fault.

With 12-seconds left in regulation, NAU's Dan Galindo hauls in a Jordan Perry pass to score the game-winning touchdown

With 12-seconds left in regulation, NAU’s Dan Galindo hauls in a Jordan Perry pass to score the game-winning touchdown. This photo was made with a Nikon D610 and Tamron 70-200 f/2.8 Di VC USD lens at 70mm, f/2.8, ISO 8063, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

The photos from the football game illustrate the most significant limitations of the lens. Those are its limited – in comparison with high end professional telephoto primes and zooms – light gathering ability and less-than-nimble autofocus performance. Let’s talk first about the light-gathering ability of the 200-500mm f/5.6E lens.

The game was played in the J. L. Walkup Skydome on the campus of Northern Arizona University. This is not a well-lit venue. The above photo of a game-winning touchdown reception was taken during a 2014 game in the Skydome. Shooting with a Tamron 70-200mm f/2.8 Di VC USD lens at 70mm f/2.8, my Nikon D610 camera body used ISO 8063 (Hi 0.3) to make a properly exposed image at 1/1000-second. This should give you an idea of the generally dim light level  (for photography) in this venue.

The 200-500mm f/5.6E delivers a constant f/5.6 focal ratio, which is two full stops slower than an f/2.8 lens. To manage the ISO and retain a minimal degree of noise-free clarity, I chose to use exposures ranging from 1/200-second to 1/500-second. Shooting at 1/200 to 1/500-second won’t come close to freezing the action of a college football game. The ISO’s chosen by the D610 at these exposure lengths generally ranged from ISO 6400 to ISO 8063 (Hi 0.3).

Starting about midway into the 3rd quarter, I shot with the 200-500 from the north end zone and photographed the action until midway through the 4th quarter. I would describe the autofocus performance as good but not impressive. This is not a lightning fast focusing lens.

I also need to acknowledge that my long telephoto lens skills are still in development. Prior to getting the 200-500, my longest lens had been the Nikon AF-S 70-300 f/4.5-5.6 ED VR. This is a consumer quality telephoto zoom. It is not impressively sharp but does offer good reach at a reasonable price. It’s also nicely portable and lightweight. In July 2015, I used the 70-300 to photograph a battle between two bison bulls for herd dominance on the North Rim of Grand Canyon. It was an exhilarating moment and the lens performed, well. However, it was that experience that got me seriously thinking about adding a long telephoto zoom to my kit. The 300mm maximum reach just wasn’t enough for that moment.

The Nikon AF-S 200-500mm f/5.6E ED VR lens mounted to an Oben CTM-2500 monopod and VH-R2 monopod tilt head. (Bill Ferris)

The Nikon AF-S 200-500mm f/5.6E ED VR lens mounted to an Oben CTM-2500 monopod and VH-R2 monopod tilt head. (Bill Ferris)

Anticipating the size, weight and magnification of the 200-500 would exceed my capacity for handholdable comfort, I purchased an Oben model CTM-2500 carbon fiber monopod to support the lens. Pictured above, is the Nikon lens mounted to the Oben monopod and VH-R2 monopod tilt head. I’ve used this combination extensively during this first month of ownership and I have to admit the monopod was a great investment. It’s carbon fiber construction makes the monopod very light, weighing in at just 1 lb. 10 oz with the attached VH-R2 head. It is a five-section design which collapses to a respectable and compact 19 3/4″ length including the tilt head. Every photo in this article taken with the 200-500 was made with the lens mounted to the Oben monopod.

There is one major criticism I have of the Oben CTM-2500 monopod. I don’t like the mounting plate that comes with the VH-R2 tilt head. It is not a standard size plate. As a result, I can’t attach a Peak Design mounting plate to the 200-500’s tripod collar foot. Also, the Oben mounting plate has a spring-loaded second pin that doesn’t have a matching companion hole in most tripod collar feet. The bottom of the 200-500’s tripod collar foot is lined with channels that provide some degree of purchase for the Oben pin. However, after a few days, the Oben plate inevitably becomes loose enough that I have to tighten the primary 1/4×20 threaded bolt to establish a secure connection.

One significant area of personal development over the first month of ownership of this lens has very little to do with photography. It is simply the challenge of becoming comfortable handling a lens of this size and weight. It’s only been in the last week or so that I’ve started feeling at ease carrying and handling the lens. It is much larger and heavier than any other lens I’ve owned or used. During the first few weeks of ownership, I was constantly worried about banging it against a wall, into a door frame or even hitting a person.

I’m also developing the ability to get close to wildlife. The challenge is to get as close to your subject as possible without encroaching such that your presence causes unnatural behaviors in the animal. Getting close is as much an art form as a skill. It requires a knowledge and skill set that has nothing, per se, to do with photography. It has everything to do with being invisible and/or perceived as a non-threat to the animal.

Once in position, achieving good results comes down to your skill in employing basic and advanced techniques of doing photography at super telephoto ranges. While the 500mm reach of the new lens has allowed me to achieve images I could previously only have imagined, I am not yet fully comfortable working at such a long focal length. This lens challenges my ability to anticipate and follow action, maintain good composition and employ good focusing technique. The margin of error in these areas is much wider when using shorter focal lengths. When working at 300mm, 400mm or more, precision in composition, tracking and technique is essential. While my skill and comfort working with this zoom range is improving, I am not yet where I want to be.

Weber State prepares to snap the ball from the 2-yard line, late in a game against host Northern Arizona. (Bill Ferris)

Weber State prepares to snap the ball from the 1-yard line, late in a game against host Northern Arizona. This photo was made with a D610 and the 200-500mm f/5.6E at 500mm, f/6.3, ISO 8063, 1/500-second. (Bill Ferris)

One photographic skill that is critical to successful photography at super telephoto lengths, is autofocus technique. I have experimented with a variety of modes available on the D610 body. I always use AF-C mode when photographing moving subjects and have been hopping about between single-point, 9-point and 3D modes. Depending on the situation, each offers its own advantages. I’m also experimenting with AF settings defining the length of time the lens will hold focus before resetting.

This brings me to a comment about the most-cited weakness of Nikon’s newest super telephoto zoom; its “poor” autofocus performance. This is, according to experts in online fora, the biggest weakness of the lens. Many of the self-appointed experts haven’t shot with the 200-500 and are relying on the comments of their favorite expert photographer…typically, a photographer who expresses a view they’ve predetermined to be correct. As mentioned previously in this review, the 200-500 does not have lightning fast autofocus. Nonetheless for many photographers, the biggest limitation impeding the quality of results achieved with this lens will be their own lack of experience working at such long focal lengths. Before blaming the lens, be sure it isn’t your own poor technique that costs you the cover of National Geographic.

Since I’ve only been using the lens a month and am still learning to master the challenges that come with shooting at super telephoto range, I’m going to suspend my final judgement on the AF performance of the 200-500 until I’ve eliminated user error as a significant contributing factor. I know for a fact that my own poor technique has cost me potentially good shots. When those instances have been eliminated – or at least, nearly so – I’ll be in a better position to comment with some degree of expertise on the inherent AF performance of this lens.

An American coot dips its beak into the Raymond County Park pond in search of a snack. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 1400, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

An American coot dips its beak into the Raymond County Park pond in search of a snack. This photo was made with a Nikon D610 and 200-500mm f/5.6E at 500mm, f/5.6, ISO 1400, 1/1000-second. It has been cropped and processed to taste in Adobe Lightroom. (Bill Ferris)

And with that, I’ll bring this Short Term Review to a close. These are my thoughts on the Nikon AF-S 200-500mm f/5.6 E ED VR lens after one-month’s ownership and use. As my time and experience with this lens increases, I will return to this blog with additional observation and thoughts on this super telephoto zoom. For now, I would sum up my observations and impressions, as follows:

The 200-500mm f/5.6E is fantastically sharp, wide open at 500mm and delivers outstanding VR performance. Priced at just under $1,400 US, this lens does not have the equivalent build quality or autofocus performance of the top professional Nikon telephoto primes and zooms. That said, this lens is an incredible value and can be a tool helping to elevate your wildlife, nature and outdoor sports photography to new levels.

Now, get out and shoot!

Bill Ferris | November 2015

Wilderness Basics

Clear Creek cuts a path from the North Rim to the Colorado River in Grand Canyon. It is also home to one of the sweetest perennial water flows in the great chasm. Arguably, the signature feature of Clear Creek is the 10-foot waterfall about a mile from the Colorado River. It is a popular day hike destination, both for river parties and for backpackers. This 1-second exposure captures the delicate beauty of the sideways waterfall and invites you to make Clear Creek a destination on your next visit to Grand Canyon National Park. (Bill Ferris)

Clear Creek cuts a path from the North Rim to the Colorado River in Grand Canyon. Arguably, the signature feature of Clear Creek is the sideways 10-foot waterfall about a mile from the river. (Bill Ferris)

Last month, I did my 23rd overnight backpack in Grand Canyon National Park. The first was in 2006, an experience that forged a lifelong connection to the most spectacular of America’s national parks. During the years since, I have hiked nearly 1,160 miles and camped 109 nights below the rim. From Nankoweap to Crazy Jug north of the river and south from the Little Colorado to Bass, I’ve walked through every side canyon that empties into the mighty Colorado.

What motivates these treks is two-fold. First, is the deeply spiritual experience of hiking in Grand Canyon. It is a feeling and place like no other. Second, is the opportunity and challenge of using my camera to capture the magnificence of this natural wonder. This recent trip confirmed my thinking about the equipment and techniques essential to making a successful photograph in a wilderness environment. In short, you need to get back to basics.

Wilderness backpacking is an activity where success or failure rests on your ability to manage resources. The resources include the gear you bring, the food you eat and the water you drink. Successful management of these items rests on your ability to prioritize, to identify those things which are essential, of value or merely trivial.

Water is essential, something you need to consume every day to maintain physical and mental well being. In a desert environment such as Grand Canyon, you had better have it or know with confidence where it can be found. Food is essential. Your pack, clothing, safety gear and first aid kit are essential.

A camera and tripod, while of value, are not essential. Neither are critical to day-to-day survival. Neither is a tool that helps you get from point A to point B. Neither provides shelter from the elements or assistance during an emergency. For most backpackers, these would be considered trivial items. Most people would bring a smart phone as a resource for communication with family and friends, during an emergency. At other times, it can function as a camera. Some hikers would bring a point & shoot – something lightweight that fits nicely in a pocket – or perhaps a small tripod or Gorilla Pod.

The gravelly carpet of the lower narrows yields to the stoney floor of the upper, in this photograph of Vishnu Narrows in Grand Canyon National Park. (Bill Ferris)

The gravelly carpet of the lower narrows yields to the stoney floor of the upper, in this photograph of Vishnu Narrows in Grand Canyon National Park. (Bill Ferris)

As a dedicated landscape photographer, the camera and related equipment – while non-essential – are highly valued by me. Two years ago, I replaced and upgraded several critical pieces of backpacking kit with the goal of reducing weight while maintaining performance. The items included my backpack, shelter, sleeping bag, sleeping pad and water treatment kit. The net result was a reduction of nearly five pounds in my backpacking base weight. (Base weight is the weight of the pack and all non-consumable contents.)

What did I do with those five pounds? Did I walk a bit lighter and quicker down the trail? Of course not. I reassigned it to photographic equipment. Instead of hiking with a crop format camera body, I now bring a full-frame sensor body. I also added a lightweight but full-size travel tripod to my kit. These items added a bit over four pounds to the weight of my pack. They also significantly increased the enjoyment I get from doing photography while backpacking.

Here’s the complete list of photographic gear I brought on a recent eight-day Grand Canyon backpack:

  • Nikon D610 camera body (w/ two spare batteries and two spare 32 GB SD cards)
  • Nikon 16-35mm f/4 wide angle zoom lens (w/ lens cleaning cloth and wipes)
  • Benro A1690T aluminum travel tripod with Benro B0 ball head (w/ backpack straps)
  • Peak Design Capture Camera Clip Pro mounting system
  • Peak Design Slide camera strap

Almost any camera (smartphone, point & shoot, etc.) can make an excellent picture in the full light of day. The equipment I packed allowed me to make excellent photos in any lighting, even at night. The D610 is a top-5 ranked camera body when it comes to the combination of resolution, dynamic range and low light performance. That 24 megapixel Sony sensor is a beast. The 16-35mm zoom lens allows me to capture awe-inspiring wide angle views. An equivalent lens on a crop-frame body would have a focal length in the 10-11mm range. No smart phone or point & shoot comes close to delivering such a wide angle view.

Early on a March morning, the summer Milky Way rises over Grand Canyon National Park. A pristine night sky is a treasure. Standing beneath a starry canopy, one can simultaneously feel insignificant and connected to all things. There is no greater cathedral, no place I feel more at home. (Bill Ferris)

Early on a March morning, the summer Milky Way rises over Grand Canyon National Park. A pristine night sky is a treasure. Standing beneath a starry canopy, one can simultaneously feel insignificant and connected to all things. There is no greater cathedral, no place I feel more at home. (Bill Ferris)

The tripod enabled me to capture quality exposures during the golden hour and at night. Without the tripod, I would have had to shoot with wide open apertures and high ISO’s to keep exposure times reasonable. With the tripod, I could use the base ISO, a small f/13 aperture and capture tack sharp landscapes during twilight. I could also make longer 1-second exposures of a waterfall to give the flowing water that silky smooth quality. Or, I could make 30-second exposures of the night sky at very high ISO to record a stunning image of the Milky Way rising over Grand Canyon.

Equally important, was what I did not bring: no backup body; no second (or third) lens; no filter(s); no speedlight(s); no reflector. Under different circumstances, I would normally have brought all these items. However, in an environment where every ounce and each square inch of space matters, these accessories are non-essentials.

I know a lot of landscape photography enthusiasts will question the decision not to bring even one filter. After all, filters are relatively small and light. Surely, I could have fit a neutral density filter, a graduated ND or a UV filter in my kit? Well, I could have. I also could have used that weight or space for more water, more food, rain gear, another clothing item or some other even more essential item.

The bottom line reality is that much of what filters offer can be achieved in Adobe Lightroom. Shooting in RAW combined with good decision-making about what to photograph and judicious use of exposure compensation allows me to capture original exposures that can be edited in Lightroom to optimize exposure, details and highlights in any area of the final photograph. All this can be accomplished in a few minutes or less. Filters, while definitely of value, are non-essential.

The 24 MP sensor combined with Lightroom’s single button click tools correcting lens distortion and chromatic aberration give me the option of shooting at 35mm in the field, then cropping to 50mm or even 75mm during post-production. In short, image processing offers the option of converting a wide angle image into a photograph captured with a standard focal length lens.

Of course, the real fun during the hike was making images that take advantage of what a true wide angle lens offers. Of the more than 1,000 photographs I took during the eight-day trip, only a handful have been cropped more than about 10% during processing. Ninety percent or more have not been cropped, at all. Some may view shooting with just one lens for a week as limiting. I saw it as both a challenge and an opportunity. The opportunity was to make dramatic wide angle landscapes in a truly stunning natural environment. The challenge was to be creative with my use of the lens throughout the week.

A backpacker steps carefully along a crumbling ridge while late day light paints a Tapeats tower in Grand Canyon National Park. (Bill Ferris)

A backpacker steps carefully along a crumbling ridge while late day light paints a Tapeats tower in Grand Canyon National Park. (Bill Ferris)

In hindsight, it wasn’t a challenge, at all. It was easy. Throughout the week, there was only one time when I missed not having a long telephoto lens in my pack. (We were standing at the edge of the Tonto Plateau looking into Vishnu Canyon and found the remnants of an old miner’s cabin. The ruins were about half-a-mile distant and, while plainly visible through a 10X monocular, were simply beyond the reach of a 35mm lens.) But for that, it was a genuinely enjoyable week of hiking in and making landscapes of Grand Canyon National Park.

You don’t need to spend a week backpacking in a wilderness area to experience the joys of shooting with a minimal kit. You can do it, any time you wish. All it takes is the willingness to leave all but your most basic and necessary gear at home. This weekend, choose one camera, one lens, a tripod, a couple of spare batteries and media cards, and allow yourself to spend an entire day taking and making great photographs with just that essential equipment. Get back to the basics.

Go ahead, get out there and shoot.

Bill Ferris | April 2015

Giving

Arizona fundraisers and non-profit organizations gathered at Prescott Resort to celebrate 2014 National Philanthropy Day.

Arizona fundraisers and non-profit organizations gathered at Prescott Resort to celebrate 2014 National Philanthropy Day. (Bill Ferris Photography)

I recently had the opportunity to photograph and document a 2014 National Philanthropy Day celebration at Prescott Resort. My wife, founding partner of GoalBusters Consulting and a long time fundraising professional, asked me to be the photographer for the event and I readily accepted. While my first love in photography is landscapes, I have been actively seeking opportunities to expand my horizons – and develop new skill sets – by doing portraiture, sports and event photography. Taking on this assignment would not only allow me to grow my event photography portfolio, it would be an opportunity to give back by volunteering my time and talent in support of people who make it their daily mission to improve the lives of others through the arts, charitable and other not-for-profit organizations.

My task list was fairly straightforward; make photographs of the following:

  • Award plaques
  • Speakers making remarks at the podium
  • Each honoree with their presenter
  • Group shots of the honorees and also of the honorees with their presenters
  • People attending the event

As you can see in the above photo, the conference room where the event was held features a panoramic wall of windows. With most clear skies on the day of the event, a wonderful, soft midday light filled the room. Seeing the award plaques displayed on a table at the front of the conference room, I started the morning by capturing a series of photos of the awards. I made at least one photo of each plaque, individually, and also of the awards as a group. After some introductory remarks by my wife and her business partner, the attendees settled in for a catered lunch.

I took advantage of this break to make some photos of the attendees relaxing and chatting with each other. I also scouted the outside terrace patio for a location to use for the group photos. The patio outside the conference room overlooks the town of Prescott, Arizona to the west-northwest. Arranging the honorees with their backs to the terrace wall would position the sun behind and to their right. This would put their faces mostly in shadow so, I made a trip to my vehicle to retrieve the speedlight kit, light stands, umbrellas and modifiers.

GoalBuster's Jim Anderson speaking at the podium during National Philanthropy Day at the Prescott Resort

GoalBuster’s Jim Anderson speaking at the podium during National Philanthropy Day at the Prescott Resort (Bill Ferris Photography)

The photo immediately above shows how the ambient outdoor light served as a beautifully soft light source when filtered through the window wall. I would have continued to shoot the event from this vantage point with my back to the windows, if not for two significant issues.

With most attendees seated directly in front of or to the left of the podium, speakers tended to look straight ahead or to their left to make eye contact with the audience. Rarely, would they look in my direction. As a result, there were few opportunities to see their eyes. The other and more significant issue was that honorees would approach the podium from the speaker’s left to receive their plaque. In hindsight, this is something I could have anticipated given that the awards were arranged on a table along the wall behind and to the left of the speaker.

When the first honoree approached the front of the room, she quite naturally stood to the left of the podium. This placed the podium between me, the honoree and her presenter, which made for an unflattering composition. I walked around the back of the room to the other side to get a better angle on the presentation. While standing with the podium to my left gave me an unobstructed view of the award presentations, it also meant that I was more or less facing the window wall. A proper exposure for the half of a person’s face illuminated by that gorgeous ambient light would leave the other half of the face darkened by shadow. A proper exposure for anything in shadow would leave the rest of the shot blown out.

Earlier after retrieving my speedlight kit from the car, I had made the above photograph of the attendees enjoying lunch in the conference room. Wanting both the view through the windows and the interior of the room to be properly exposed in a single shot, I had set up four speedlights to illuminate the room interior during the exposure. Two were Yongnuo YN-560 III’s, which have built-in radio receivers. The other two were Nikon SB-700’s, which were mounted on Vello FreeWave Fusion radio receivers. With a Yongnuo 603 NII radio transmitter attached to my Nikon D610 hot shoe and a Vello radio trigger mounted atop the 603 NII, I experimented with shutter speed and flash intensity until I was happy with the result.

Here, are the settings for the final exposure (Nikon D610, Tamron 24-70 f/2.8 VC):

  • 24mm
  • f/10
  • ISO 450
  • 1/160-second
  • Two speedlights at 1/2-power
  • Two speedlights at 1/4-power

While making my trek to the other side of the room to a vantage point with an unobstructed view of the honorees, I powered up and the speedlights (they were still set up and in position) and switched on the radio triggers on the D610. After a couple test shots to adjust settings, I was back in business.

An honoree (left) and her presenter at the National Philanthropy Day celebration at Prescott Resort

An honoree (left) and her presenter at the National Philanthropy Day celebration at Prescott Resort (Bill Ferris Photography)

The above photograph is one of many I shots I made using speedlights on radio triggers to illuminate the subjects. I bounced the flashes off the ceiling to create and even wash throughout the conference room. With four speedlights at between 1/4- and 1/2-power, the recycle time was kept to a minimum. When photographing the presenter speaking at the podium, I used the following settings (Nikon 610, Tamron 70-200 f/2.8 VC):

  • 200mm focal length
  • f/2.8
  • ISO 200
  • 1/200-second exposure

When the honoree came up to accept their award plaque, I made portraits using different settings (Nikon 610, Tamron 70-200 f/2.8 VC):

  • Variable focal length (95mm to 140mm)
  • f/5.6
  • ISO 640
  • 1/200-second exposure

My only concern with this set up was that the speedlights, when firing, would be something of a distraction for the attendees. However, I can safely say very few people even noticed I was using flash to illuminate the room. There was one gentleman who asked me about my lighting after the awards ceremony. Rather than finding it a distraction, he wanted to know more about the radio triggers and receivers.

While processing the RAW exposures, I noticed that the depth of field at f/5.6 was not quite enough to guarantee crisp focus on the eyes of both people. While the images are acceptable (in my opinion), I would probably shoot at f/7.1 or f/8 in the future to ensure sharp focus on both sets of eyes.

A group photo of the honorees and presenters at Prescott Resort for Arizona's National Philanthropy Day celebration

A group photo of the honorees and presenters at Prescott Resort for Arizona’s National Philanthropy Day celebration (Bill Ferris Photography)

After the ceremony, I went outside with the honorees and presenters to take the group photos. I made an exposure of the full group without using speedlights and, as expected, the faces were in shadow. After retrieving the Nikon SB-700’s, I recruited a couple of lighting assistants to hold the speedlights, one to the left and the other to the right of the group. I then made an exposure firing the SB-700’s at full power. This photo looked overexposed so, I reset the flash intensity to 1/2-power on each unit and retook the group photo. The resulting image is presented, above.

While the speedlights definitely help this photograph, I should have done a better job of arranging the group so nobody would be in shadow. Also, I had to do a fair bit of processing in Adobe Lightroom to recover highlights and reduce the overall exposure. Shooting in RAW compensates for a multitude of sins. I reduced the exposure by 1.10 stop without losing any detail in the final image.

So, what did I learn from this experience? First, it is critical to be equipped for any lighting situation. The speedlights gave me more shooting options. When the ambient, natural light was at my back, I could simply switch off the radio triggers. When shooting toward the window wall and into the light, I could switch on the triggers and use the speedlights to illuminate my subject. Second, using down time (I chose to forego lunch) to make the wide angle photo of the luncheon paid huge dividends. With the speedlights already set up, it only took me a minute to power them back on and adjust their intensity. As a result, I was able to very quickly adapt to a new shooting location and a different lighting environment. I only missed photographing one award presentation during the ceremony and was able to make that up as soon as the ceremony ended.

Finally, I should have taken the time to better arrange the group shot and do test exposures on the outdoor terrace. This would have taken only a few minutes, but would have resulted in better images and saved some worry on the drive home. Shooting in RAW allowed me to recover all the detail that was lost in the original, overexposed photographs. If I had taken the time to properly arrange the group photo and to adjust my exposure settings, those original RAW files would have been better exposed and nobody would have been in shadow.

A celebratory embrace during the National Philanthropy Day event at Prescott Resort

A celebratory embrace during the National Philanthropy Day event at Prescott Resort (Bill Ferris Photography)

I was also reminded of the joy of giving. As each presenter shared the story of their respective honoree, I was so impressed by the generosity and compassion of the human spirit. Each award recipient had generously given their time, talent or treasure in support of a non-profit organization or cause. Attending this event and hearing these stories, I was reminded that the simple act of giving often delivers the greatest personal rewards.

Now, get out there and shoot.

Bill Ferris | November 2014

 

Vibration Compensation

AFP sign photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/8 with Vibration Compensation engaged.

AFP sign photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/8 with Vibration Compensation engaged. (B. Ferris)

In the Nikon universe, it is referred to as vibration reduction. In Canon parlance, it is called image stabilization. In other worlds, it is referred to as vibration compensation. However you say it, the ability of modern lenses and cameras to compensate for the inherent shakiness of hand-holding your camera to make a photograph has been a significant and positive development in the art form of digital imaging.

To take a closer look at and better understand vibration compensation technology, I decided to set up a test. I used my Nikon D610 camera and a Tamron 70-200 Di VC USD zoom lens to make a series of photographs. The photographs ranged in exposure length from 1/25-second to 1/4000-second. I made at least two exposures at each length, one with the Tamron lens’s vibration compensation engaged and active, and the other with vibration compensation disengaged. For exposures between 1/100-second and 1/2000-second, I made two sets of exposures with VC engaged and disengaged.

I chose a yard sign as the photo subject. The sign features bold lettering against an off-white plastic surface. I set  up the sign in my garage in the shade so it would be illuminated by a soft, even and constant light level. I then set up a folding camp chair in the driveway about six feet from the sign. With the Tamron lens set to 200mm, I began making exposures.

I used the camera’s auto ISO setting to make the exposures from 1/100-second to 1/2000-second, first. With the D610 in aperture priority, I would set the minimum shutter speed at the desired exposure length. Then, I would adjust aperture until the camera would select an ISO that would produce an exposure of the desired length. The D610 will not make an exposure shorter than 1/2000-second in auto ISO so, I put the camera in manual mode to make the exposures at 1/4000-second. Here, are the settings used to make each shot:

  • 1/25-second: Two exposures, one with VC on and the other with VC off. Both at ISO 100, f/25
  • 1/40-second: Two exposures, one with VC on and the other with VC off. Both at ISO 110, f/20
  • 1/100-second: Four exposures, two with VC on and two with VC off. Two at ISO 125, f/11. Two at ISO 100, f/11
  • 1/200-second: Four exposures, two with VC on and two with VC off. Two at ISO 125, f/8. One at ISO 200, f/11. One at ISO 220, f/11
  • 1/400-second: Four exposures, two with VC on and two with VC off. Two at ISO 250, f/8. One at ISO 160, f8. One at ISO 100, f/8
  • 1/800-second: Four exposures, two with VC on and two with VC off. Two at ISO 250, f/5.6. One at ISO 140, f/5.6. One at ISO 110, f/5.6
  • 1/1000-second: Four exposures, two with VC on and two with VC off. Two at ISO 320, f/5.6. One at ISO 160, f/5.6. One at ISO 120, f/5.6
  • 1/1250-second: Four exposures, two with VC on and two with VC off. Two at ISO 400, f/5.6. Two at ISO 200, f/5.6.
  • 1/1600-second: Four exposures, two with VC on and two with VC off. Two at ISO 500, f/5.6. One at ISO 220, f/5.6. One at ISO 250, f/5.6
  • 1/2000-second: Four exposures, two with VC on and two with VC off. Two at ISO 640, f/5.6. One at ISO 280, f/5.6. One at ISO 320, f/5.6
  • 1/4000-second: Two exposures, one with VC on and the other with VC off. One at ISO 640, f/5.6. One at ISO 500, f/5.6

I performed the test for several reasons. One, was to see for myself the extent to which vibration compensation delivers sharper, more detailed images than those made with without VC. Also, I wanted to test a couple of assertions made by photographers who don’t use vibration compensation when shooting at fast exposure rates – 1/1000 to 1/1600 or faster. The usual thinking is that VC offers no benefits at such fast exposures. Some even claim that VC introduces blur when engaged at fast exposure rates.

The results of the above test do not support either claim, not in the least. At all exposures, the images made with vibration compensation turned on appeared sharper and more detailed than those made with VC disabled. Even the VC-engaged image made at 1/4000-second was noticeably sharper than the strictly handheld image made at the same rate. Below, are 100% crops of several exposures. They are JPEG conversions from unprocessed RAW files:

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/8, ISO 125, 1/200 with Vibration Compensation engaged.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/8, ISO 125, 1/200 with Vibration Compensation engaged.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/8, ISO 125, 1/200 with Vibration Compensation off.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/8, ISO 125, 1/200 with Vibration Compensation off.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 160, 1/1000 with Vibration Compensation engaged.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 160, 1/1000 with Vibration Compensation engaged.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 140, 1/1000 with Vibration Compensation off.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 140, 1/1000 with Vibration Compensation off.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 280, 1/2000 with Vibration Compensation engaged.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 280, 1/2000 with Vibration Compensation engaged.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 320, 1/2000 with Vibration Compensation off.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 320, 1/2000 with Vibration Compensation off.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 640, 1/4000 with Vibration Compensation engaged.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 640, 1/4000 with Vibration Compensation engaged.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 500, 1/4000 with Vibration Compensation off.

Photographed with Nikon D610 and Tamron 70-200 Di VC USD zoom lens at 200mm, f/5.6, ISO 500, 1/4000 with Vibration Compensation off.

Based on the results from this test, I am persuaded to keep vibration compensation engaged whenever shooting handheld and regardless of the length of the exposure. Doing so will not introduce blur or distortion and will probably result in a sharper, more detailed photograph.

But don’t take my word for it. See for yourself. Get out and shoot.

Bill Ferris | October 2014